Globe v2.1 serial key or number
Circuit Setter Plus Calibrated Balance Valves
The Bell & Gossett Circuit Setter Plus is a calibrated balance valve designed for pre-set proportional system balance. Since its introduction to the HVAC industry in , the Bell & Gossett Circuit Setter has set the standard for proportionally balancing hydronic HVAC systems. This system balance method, developed by Bell & Gossett, assures optimum system flow balance at minimum pump operating horsepower. Valves can simply be pre-set using the B&G Circuit Setter Balance Valve Calculator, curve booklet G, or the System Syzer application for iPhone, iPad, or PC.
Circuit Setters are available in a wide range of sizes and styles to meet all your system demands. Brass valves, in sizes 1/2” through 3”, utilize a full port ball valve with calibrated nameplate and feature a memory stop and two integrated pressure/temperature ports for easy ∆P measurement. Additionally, All brass Circuit Setters are CSA certified to be in compliance with the low lead requirements of California, Vermont, Maryland, Louisiana, and NSF//ANSI
For larger sized systems, Circuit Setters are available in ball style (2 1/2” – 4”) and globe style (4” – 12”). Our globe style valves include a multi-turn stem, calibrated nameplate, memory button for easy re-setting of the valve position after shut-off/isolation, and integrated pressure/temperature ports.
Features and Benefits
- Lead Free Brass Design
- Brass models 1/2” through 3” suitable for use in all potable water systems
- AB Certified
- Vermont S Certified
- ANSI/NSF Annex G Compliant
- Calibrated Accurate Flow Control and Measurement
- Sizes from 1/2” – 12”
- Ball valve style 1/2” through 4”
- Globe valve style 4” – 12”
- Multiple End Connections Available
- Union – Upstream (1/2” – 2”)
- Sweat (Female) and NPT (Male and Female) (1/2” – 2”)
- Flanged 2 1/2” – 12”
- Grooved 4” – 12”
- Flow Range up to 7, GPM
- Pre-Balance Design Capability
- Integrated Valved Readout Ports
Apologies, this section cannot be viewed in mobile
Circuit Setter Balance Valves
, Globe v2.1 serial key or number
Globe v2.1 serial key or number
About Milwaukee Valve
Actuation Webinar Session 2 9/1/20 — Intro to MV Actuation Webinar
9/29/20 — Putting the Package Together In Case You Missed It, Click Here
Click Here To Register
The Milwaukee Valve Company was established in Wisconsin in , starting out as a small manufacturer of plumbing and heating valves. Herschel Seder purchased the business in , with his late partner, Max Koenigsberg. Over the years, the company expanded its offering to what now consists of over 5, items, used in a very wide range of applications and industries, from very small plumbing valves used in the basement of your home, to large petro chemical valves and nearly every size and style of valve in between.
Because of our long history, our experience in a broad range of services, and finally our people, many of who have been with the company for 25 years or more, we have developed a unique blend of capabilities unmatched in our industry by any of our competitors. The purpose of this write-up is to outline these capabilities for the benefit of our current and future customers. We are an international organization on both the supply and sales sides of the business. We apply our stringent quality controls to the production of all material, whether we make it in our factories in Wisconsin, or our wholly owned operation in China, or one of our joint ventures elsewhere in the world.
Hammond Valve has been meeting our quality standards.
Bradley C. Anderson – Pioneer Mechanical Welding, Inc.
Q: Does Milwaukee Valve try to work with you in solving the simple and difficult flow control applications?
A: Brian Isaac, you are the best! – (Milwaukee Valve, Product Marketing Manager)
Jack Chester – Lakeside Supply
Hammond/Milwaukee Valve has always provided a quality product at a competitive price.
Sarah Calabrese (Purchasing) – Bender
We have been working with Milwaukee Valves for years because they have good products and good people to make us more successful.
Brent Bertrand DSI
The Inspire 1 was a revelation. The first filmmaking drone in the world to integrate an HD video transmission system, ° rotating gimbal and a 4K camera, as well as the simplicity of app control. The launches of the Zenmuse X5 and X5R cameras further cemented the Inspire as a critical tool for filmmakers around the globe.
The Inspire 2 takes everything that was good about the Inspire 1 and improves it. The image processing system CineCore has been upgraded to CineCore, recording video at up to 6K in CinemaDNG/RAW and K in Apple ProRes when used with Zenmuse X7 camera. It goes from 0 to 50 mph (80 kph) in just 5 seconds andhits a maximum speed of 58 mph (94 kph) and has a max descent speed of 9m/s for unheard of speed and agility in an aircraft this size. A dual battery system prolongs the flight time to a maximum of 27 minutes (with an X4S), while self-heating technology allows it to fly even in low temperatures. FlightAutonomy has been revised and developed specifically for the Inspire 2, providing two directions of obstacle avoidance and sensor redundancy. Increased intelligence adds multiple intelligent flight modes, including Spotlight Pro, giving even single pilots the ability to create complex, dramatic shots. An upgraded video transmission system is now capable of dual signal frequency and dual channel, streaming video from an onboard FPV camera and the main camera simultaneously, for better pilot and camera operator collaboration.
- Image Processing
- Remote Controller
Magnesium aluminum composite shell and transforming design, carbon fiber arms
Vision sensing, 2-axis FPV camera, range of supported cameras
58 mph (94 kph) max speed, 2 kg of thrust per rotor, in props, min* flight time with X7, min* flight time with X4S.
Dual battery, self-heating, battery redundancy, 98Wh
*Hovering at sea level with no wind
6K RAW @ Gbps* video recording, all-new CineCore , integrated DJI cipsas.com32/exFAT universal file system.
6K CinemaDNG* and K Apple ProRes video support, H and H video codec support, 4K video at Mbps. Recorded video can be stored simultaneously on the DJI CINESSD and a Micro- SD card.
* Zenmuse X7 camera required
Signal frequency switching between GHz and GHz. Lightbridge technology mi (7km)*
One primary and one secondary supported. Multilink required when using multiple secondary cipsas.comion port, HDMI port, USB port
*Unobstructed, free of interference, when FCC compliant.
Professional Image Quality
Integrated into the Inspire 2 is the brand new CineCore image processing system, which is capable of recording video in 6K @Gbps CinemaDNG*1, K @Gbps Apple ProRes*2, and H/H @Mbps. CineCore supports burst shots, capturing 10 JPEG + DNG bursts and continuous DNG bursts*3 at 20fps (24MP per shot) when the Zenmuse X7 is mounted. (Currently compatible with the X7, X5S and X4S*4. Please refer to Specs for the supported video formats of each camera).
6K ( × , ) 30 fps bit, Gbps
K ( × , ) 60 fps bit, Gbps
Built-in 3D noise reduction, 3DLUT color management technology, advanced sensor correction.
H/AVC BP/MP/HP Level 4K 60 fps, Mbps;H MP Level 4K 30 fps, Mbps;
K ( × , ) 30fps ( HQ)
4K ( × , ) 30fps ( XQ, no alpha)
JPEG/DNG/JPEG+DNG 10 fps in burst 24 MP*5
DNG 20 fps continuous burst 24 MP*6
*1*2 Additional licenses required*3 DJI CINESSD required for CinemaDNG continuous burst
*4 X4S does not support DNG RAW or Apple ProRes*5 Photos stored on Micro SD card*6 Photos stored on DJI CINESSD
The Inspire 2 creative workflow has been completely optimized and is now capable of recording video in CinemaDNG and Apple ProRes, and other common formats for post-production in filmmaking. Also supported are FAT32/exFAT* file systems, which allow fast copying of files direct from the CINESSD without additional software.
* Coming soon.
Spotlight Pro is a powerful tracking mode that allows even single pilots to capture complex, dramatic images. It uses advanced visual tracking algorithms to lock onto a subject during flight, regardless of the direction that the Inspire 2 flies, creating shots that would once have required a dedicated camera operator. If the gimbal comes close to reaching its rotation limits, the Inspire 2 itself will rotate in the same direction without affecting flight control or the shot being captured to free up gimbal movement.
It has two shooting modes, Quick Mode and Composition Mode. In Quick Mode, select an object to begin tracking. In Composition Mode, select the subject and the tracking position. When the subject enters the preset tracking position, press the shortcut to begin tracking. The gimbal can be moved during shooting for composition cipsas.comght Pro is available in Intelligent Flight Modes TapFly, Waypoint, and Point of Interest.
Intelligent Flight Modes
In addition to Spotlight Pro, a range of other intelligent flight and shooting modes are available. Obstacle avoidance is optimized when using Point of Interest*and Waypoint* modes, making complex shots simple and repeatable. Also available are QuickSpin, TapFly and ActiveTrack, to simplify challenging shots.
The 2-axis onboard FPV camera separates the flight view from the main camera view, effectively giving the Inspire 2 a dedicated TapFly camera. Tap a point onscreen in the FPV view to set a flight route and the Inspire 2 will automatically fly along that route, leaving the pilot to focus on gimbal movement.
The ActiveTrack Mode allows the Inspire 2 to recognize a range of objects, from people to bikes to cars to boats. Tracking profiles that can be adjusted based on the subject being tracked means greater tracking precision.
Smart Return to Home
Forward and downward vision systems allow the Inspire 2 to create a real-time map of its flight route as it flies. If the video transmission system signal is lost and Smart Return to Home is enabled, it is able to fly home along its original route, and change to a straight line when it regains a signal. As it returns, it will use the primary camera to identify obstacles as far as m in front, allowing it to plan a safe route home. It is also able to reconnect more quickly after losing connection.
Video Transmission System
The latest update to DJI Lightbridge technology has an effective transmission distance of up to mi (7km)* and is capable of delivering both p/p video as well as the FPV view to pilot and camera operator. Users can also switch between GHz and GHz** control frequencies to cut through noise for greater signal stability.
Primary and Secondary Controllers
A new wireless HD image transmission technology sends video information from
the primary controller to the secondary controller and the two controllers can be up to
m apart without loss of image quality.**
*Unobstructed, free of interference, FCC compliant.
**GHz transmission is not available in some regions due to local regulations.
Powerful Flight Performance
A new propulsion system optimized for power creates a new level of flight performance. The Inspire 2 flies at up to 58mph (94kph) descends at 9m/s and ascends at 6m/s. It can accelerate from 0 to 50mph (80kph) in just 5 seconds and flies at a max attitude angle of 40°. The two controller sticks are tuned for more sensitivity, making delicate maneuvers easier.
More power also allows the Inspire 2 to fly in more extreme conditions, including over m above sea level (using optional dedicated propellers), and in temperatures as low as -4°F (°C) using self-heating Intelligent Flight Batteries.
Dual-Signal Propulsion System
Reliability has been further enhanced through dual redundancy of key modules such as the IMU and barometer. The intelligent flight control system monitors the redundancy system, giving it accurate flight data.
The new obstacle sensing system helps the Inspire 2 sense and avoid obstacles, minimizing the risk of collision.
Dual batteries mean that if a problem occurs on one battery the other is able to continue flight long enough for a safe landing. At the same time, the Inspire 2 propulsion system is driven a PWM signal with serial port signal redundancy so that if PWM signals are lost, transmission will continue through the serial port.
This propulsion system has been tested for thousands of hours to ensure reliability, when combined with key sensors and a dual-battery design, overall flight reliability is significantly enhanced.
Optional Accessories to Enhance Performance
A series of powerful DJI accessories help improve work efficiency and give filmmakers more creative opportunities.
DJI CINESSD and CINESSD Station
DJI CINESSD uses an NVMe logical device interface specification, features four PCI Express ports and supports FAT32/exFAT*2 file formats. It comes in GB，GB and GB. When using a GB or GB CINESSD, the Inspire 2 can record videos at write speeds of up to Gbps, providing enough data to meet demanding filmmaking cipsas.com DJI CINESSD Station is used to connect the DJI CINESSD into a computer for fast, efficient file transfer.
Multilink is designed specifically for use with the INSPIRE 2 remote controller and CENDENCE remote controller. It can create a primary-secondary controller network with up to three secondary remote controllers. Use with the Cendence remote controller and patch antenna for best results.
Inspire 2 Activation Key of RAW & Apple ProRes
Inspire 2 Activation Key for RAW & Apple ProRes allow CineCore to record in CinemaDNG and Apple ProRes*. These are available for purchase separately and allow the Zenmuse X7 and Zenmuse X5S camera to produce the exact file type needed for individual post-production requirements.
*Please note that maximum video resolution is subject to DJI CINESSD capacity. Refer to the User Manual for details.
A inch, cd/m² display, a inch cd/m² display and a inch cd/m² display, are all designed by DJI to offer the brightness and clarity needed when shooting outdoors. A powerful video decoder integrated in these displays create smooth video and integrated image enhancement increases performance in bright environments. All these displays are operational from -4°F (°C) to °F (40°C) and are made to work with a replaceable external battery.
DJI Focus adds remote focus control to the Zenmuse X7, X5S and X4S.
DJI Battery Station
An W Battery Station charges up to eight Inspire 2 batteries. With additional space for storing four Intelligent Flight Batteries and a standard battery charger. The DJI Battery Station is also equipped with two USB charging ports.
Make the most of your Inspire 2 by using professional handheld equipment when shooting on the ground.
Remote Controller GPS Module
A GPS Module for the Remote Controller improves the accuracy of the remote controller’s positioning. Used with the Inspire 2’s Dynamic Home point function which constantly updates the latest location of the remote controller as its Home point, it allows accurate Return to Home when moving around an environment.
- Up to 27 mins flight
- 58 mph max speed
- Up to 7km control range
Buy NowLearn About the Zenmuse X7
Prices on the official website are for reference only. Visit the DJI Online Store to see the most up-to-date prices.
What’s New in the Globe v2.1 serial key or number?
System Requirements for Globe v2.1 serial key or number